4 open source boards using the LM399

Real designs built with the LM399, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The LM399 in open source designs

The gallery holds 4 open source boards using the LM399 from 4 GitHub repositories; a typical one measures about 102.8 × 65 mm and carries around 85 components.

75% use four copper layers or more, and 50% carry an open source license.

The most starred is Multislope-3I by NNNILabs.

Parts used alongside the LM399

Microcontrollers on boards using the LM399

LM399: common questions

Where can I find a LM399 reference design?

Each of the 4 boards on this page is a real design using the LM399. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the LM399 use?

Most are built on RP2040/RP2350 (1).

How big is a typical board using the LM399?

The median is 102.8 × 65 mm, and 25% are two-layer designs.

What is the most popular open source board using the LM399?

By GitHub stars, Multislope-3I by NNNILabs, with 43 stars.

Can I simulate one of these boards using the LM399 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part