3 open source boards using the LM5008MM

Real designs built with the LM5008MM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The LM5008MM in open source designs

The gallery holds 3 open source boards using the LM5008MM from 3 GitHub repositories; a typical one measures about 73.7 × 68.9 mm and carries around 106 components.

50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Gesc by CTSchorsch.

Microcontrollers on boards using the LM5008MM

What boards using the LM5008MM are built for

LM5008MM: common questions

Where can I find a LM5008MM reference design?

Each of the 3 boards on this page is a real design using the LM5008MM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the LM5008MM use?

Most are built on Nordic nRF (1) and STM32 (1).

How big is a typical board using the LM5008MM?

The median is 73.7 × 68.9 mm, and 50% are two-layer designs.

What is the most popular open source board using the LM5008MM?

By GitHub stars, Gesc by CTSchorsch, with 17 stars.

Can I simulate one of these boards using the LM5008MM before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part