6 open source boards using the LM7912
Real designs built with the LM7912, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Analog board
minisystem
200 × 150 mm500 parts2LNo license3PIC
GPSDO
dewayne57
203.2 × 152.4 mm157 parts2LApache-2.00ESP32
Precision-Analog-Front-End
LemonAidLee
78 × 99.5 mm29 parts2LCERN-OHL-P-2.00Jme euro power
memestreak
160 × 63.5 mm22 parts2LNo license0- schematic only · 6 parts
Kicad netlist tools
JimmyCaytuiro
6 partsMIT0 Mfos power
blthree
91.5 × 68.7 mm27 parts2LNo license0
How designs wire the LM7912
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LM7912 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a capacitor to GND on 4 of 5 designs, most often 3.3 mF (then 4.7 mF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VIpin 2 | Connected to: Signal 80% · -15V 20% |
|
| VOpin 3 | Connected to: -12V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Analog board by minisystem, Mfos power by blthree, GPSDO by dewayne57 and Precision-Analog-Front-End by LemonAidLee.
The LM7912 in open source designs
The gallery holds 6 open source boards using the LM7912 from 6 GitHub repositories; a typical one measures about 160 × 99.5 mm and carries around 28 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Analog board by minisystem.
Parts used alongside the LM7912
What boards using the LM7912 are built for
LM7912: common questions
Where can I find a LM7912 reference design?
Each of the 6 boards on this page is a real design using the LM7912. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM7912 VI pin connected?
The VI pin has a capacitor to GND on 4 of 5 designs, most often 3.3 mF (then 4.7 mF). Counted from the KiCad layouts of 5 open source designs using the LM7912.
Which microcontrollers do boards using the LM7912 use?
Most are built on ESP32 (1) and PIC (1).
How big is a typical board using the LM7912?
The median is 160 × 99.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the LM7912?
By GitHub stars, Analog board by minisystem, with 3 stars.
Can I simulate one of these boards using the LM7912 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.