3 open source boards using the LMA3722T421-OA5

Real designs built with the LMA3722T421-OA5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The LMA3722T421-OA5 in open source designs

The gallery holds 3 open source boards using the LMA3722T421-OA5 from 2 GitHub repositories; a typical one measures about 123 × 55 mm and carries around 114 components.

100% use four copper layers or more, and 67% carry an open source license.

The most starred is NerdYcontroller by KidsLabDe.

Parts used alongside the LMA3722T421-OA5

Microcontrollers on boards using the LMA3722T421-OA5

LMA3722T421-OA5: common questions

Where can I find a LMA3722T421-OA5 reference design?

Each of the 3 boards on this page is a real design using the LMA3722T421-OA5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LMA3722T421-OA5?

The AMS1117-3.3, RP2040 and W25Q128JVS appear in the most repositories here.

Which microcontrollers do boards using the LMA3722T421-OA5 use?

Most are built on RP2040/RP2350 (2) and ESP32 (1).

How big is a typical board using the LMA3722T421-OA5?

The median is 123 × 55 mm, and 0% are two-layer designs.

What is the most popular open source board using the LMA3722T421-OA5?

By GitHub stars, NerdYcontroller by KidsLabDe, with 5 stars.

Can I simulate one of these boards using the LMA3722T421-OA5 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part