2 open source boards using the LMR36006FSCQRNXTQ1

Real designs built with the LMR36006FSCQRNXTQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The LMR36006FSCQRNXTQ1 in open source designs

The gallery holds 2 open source boards using the LMR36006FSCQRNXTQ1 from 2 GitHub repositories; a typical one measures about 74.8 × 78.3 mm and carries around 237 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is ${DOC TYPE} Document by EPFLXplore.

Parts used alongside the LMR36006FSCQRNXTQ1

Microcontrollers on boards using the LMR36006FSCQRNXTQ1

What boards using the LMR36006FSCQRNXTQ1 are built for

LMR36006FSCQRNXTQ1: common questions

Where can I find a LMR36006FSCQRNXTQ1 reference design?

Each of the 2 boards on this page is a real design using the LMR36006FSCQRNXTQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LMR36006FSCQRNXTQ1?

The AS5047P-ATSM, LP2992IM5-3.3/NOPB and TPS62172DSGR appear in the most repositories here.

Which microcontrollers do boards using the LMR36006FSCQRNXTQ1 use?

Most are built on STM32 (2).

How big is a typical board using the LMR36006FSCQRNXTQ1?

The median is 74.8 × 78.3 mm, and 0% are two-layer designs.

What is the most popular open source board using the LMR36006FSCQRNXTQ1?

By GitHub stars, ${DOC TYPE} Document by EPFLXplore, with 347 stars.

Can I simulate one of these boards using the LMR36006FSCQRNXTQ1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part