2 open source boards using the LP2985-18DBVR

Real designs built with the LP2985-18DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The LP2985-18DBVR in open source designs

The gallery holds 2 open source boards using the LP2985-18DBVR from 2 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 231 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Trv by Polski-Zwiazek-Krotkofalowcow.

Microcontrollers on boards using the LP2985-18DBVR

What boards using the LP2985-18DBVR are built for

LP2985-18DBVR: common questions

Where can I find a LP2985-18DBVR reference design?

Each of the 2 boards on this page is a real design using the LP2985-18DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LP2985-18DBVR?

The 74LVC2G17, L78L09ACUTR, MAX20457ATIF/VY+, MHT2012NT1 and MIC5219-3.0YMM appear in the most repositories here.

Which microcontrollers do boards using the LP2985-18DBVR use?

Most are built on STM32 (2).

How big is a typical board using the LP2985-18DBVR?

The median is 100 × 100 mm, and 100% are two-layer designs.

What is the most popular open source board using the LP2985-18DBVR?

By GitHub stars, Trv by Polski-Zwiazek-Krotkofalowcow, with 11 stars.

Can I simulate one of these boards using the LP2985-18DBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part