2 open source boards using the LP5907MFX-1.2/NOPB (Texas Instruments)
Real designs built with the LP5907MFX-1.2/NOPB (Texas Instruments), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350FcmlPanel
BerkeleyHCI
115 × 72 mm240 parts2LBSD-3-Clause91
RP2040/RP2350Fcml
78 × 72 mm179 parts2LBSD-3-Clause91
The LP5907MFX-1.2/NOPB (Texas Instruments) in open source designs
The gallery holds 2 open source boards using the LP5907MFX-1.2/NOPB (Texas Instruments) from 1 GitHub repository; a typical one measures about 96.5 × 72 mm and carries around 210 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is FcmlPanel by BerkeleyHCI.
Microcontrollers on boards using the LP5907MFX-1.2/NOPB (Texas Instruments)
LP5907MFX-1.2/NOPB (Texas Instruments): common questions
Where can I find a LP5907MFX-1.2/NOPB (Texas Instruments) reference design?
Each of the 2 boards on this page is a real design using the LP5907MFX-1.2/NOPB (Texas Instruments). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LP5907MFX-1.2/NOPB (Texas Instruments) use?
Most are built on RP2040/RP2350 (2).
How big is a typical board using the LP5907MFX-1.2/NOPB (Texas Instruments)?
The median is 96.5 × 72 mm, and 100% are two-layer designs.
What is the most popular open source board using the LP5907MFX-1.2/NOPB (Texas Instruments)?
By GitHub stars, FcmlPanel by BerkeleyHCI, with 91 stars.
Can I simulate one of these boards using the LP5907MFX-1.2/NOPB (Texas Instruments) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.