2 open source boards using the LT219-1
Real designs built with the LT219-1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Module 16S
stuartpittaway
71.1 × 89.6 mm113 parts4LCC-BY-NC-4.01.1k
ESP32DIYBMS ESP32 Controller
122.5 × 87.6 mm90 parts2LCC-BY-NC-4.01.1k
The LT219-1 in open source designs
The gallery holds 2 open source boards using the LT219-1 from 1 GitHub repository; a typical one measures about 96.8 × 88.6 mm and carries around 102 components.
50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Module 16S by stuartpittaway.
What boards using the LT219-1 are built for
LT219-1: common questions
Where can I find a LT219-1 reference design?
Each of the 2 boards on this page is a real design using the LT219-1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LT219-1 use?
Most are built on ESP32 (1) and STM32 (1).
How big is a typical board using the LT219-1?
The median is 96.8 × 88.6 mm, and 50% are two-layer designs.
What is the most popular open source board using the LT219-1?
By GitHub stars, Module 16S by stuartpittaway, with 1,136 stars.
Can I simulate one of these boards using the LT219-1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.