5 open source boards using the LTC2983

Real designs built with the LTC2983, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the LTC2983

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LTC2983 connects to, and the resistors, capacitors and other passives placed on it.

  • The VREF_BYP pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 1 µF).
  • The LDO pin has a capacitor to GND on 5 of 5 designs, most often 10 µF.
  • The Q3 pin has a capacitor to GND on 5 of 5 designs, most often 10 µF.
  • The Q2 pin has a series capacitor on 5 of 5 designs, most often 10 µF.
GNDpin 1, 3, 5, 7, 9, 12, 15, 44Connected to: GND 100%
VDDpin 2, 4, 6, 8, 45Connected to: 5V 100%
  • Decoupling capacitor on 60% · 100 nF (12)
NCpin 10Connected to: Not connected 100%
VREF_BYPpin 11Connected to: Signal 80% · VREFBYP2 20%
  • Capacitor to GND on 100% · 100 nF (3), 1 µF (1), 10 µF (1)
VREFOUTpin 13Connected to: Signal 60% · GND 20% · VREF2 20%
  • Capacitor to GND on 80% · 1 µF (4)
VREFPpin 14Connected to: Signal 60% · GND 20% · VREF2 20%
  • Capacitor to GND on 80% · 1 µF (4)
CH1pin 16Connected to: Signal 80% · GND 20%
  • Capacitor to GND on 60% · 100 nF (2), 1 µF (1)
  • Series resistor on 60% · 1 kΩ (2)
CH2pin 17Connected to: Signal 80% · GND 20%
  • Capacitor to GND on 60% · 1 nF (1), 1 µF (1), 10 nF (1)
  • Series resistor on 60% · 3.74 kΩ (1), 1 kΩ (1)
CH3pin 18Connected to: Signal 80% · GND 20%
  • Capacitor to GND on 60% · 100 nF (2), 1 µF (1)
  • Series resistor on 40% · 1 kΩ (2)
CH4pin 19Connected to: Signal 80% · GND 20%
  • Capacitor to GND on 60% · 1 nF (1), 1 µF (1), 100 nF (1)
  • Series resistor on 60% · 1 kΩ (2), 3.74 kΩ (1)
CH5pin 20Connected to: Signal 80% · GND 20%
  • Capacitor to GND on 60% · 1 µF (1), 100 nF (1), 10 nF (1)
CH6pin 21Connected to: Signal 80% · GND 20%
  • Capacitor to GND on 60% · 1 nF (1), 1 µF (1), 100 nF (1)
  • Series resistor on 60% · 1 kΩ (2), 3.74 kΩ (1)
CH7pin 22Connected to: Signal 80% · GND 20%
  • Capacitor to GND on 60% · 100 nF (2), 1 µF (1)
  • Series resistor on 40% · 1 kΩ (2)
CH8pin 23Connected to: Signal 80% · GND 20%
  • Capacitor to GND on 60% · 1 nF (1), 1 µF (1), 10 nF (1)
  • Series resistor on 40% · 3.74 kΩ (1), 1 kΩ (1)
CH9pin 24Connected to: A connector 40% · GND 20%
  • Capacitor to GND on 40% · 1 µF (1), 100 nF (1)
  • Series resistor on 40% · 1 kΩ (2)
CH10pin 25Connected to: A connector 40%
  • Capacitor to GND on 60% · 1 nF (1), 1 µF (1), 100 nF (1)
  • Series resistor on 60% · 1 kΩ (2), 3.74 kΩ (1)
CH11pin 26Connected to: A connector 40% · GND 20%
  • Capacitor to GND on 40% · 1 µF (1), 10 nF (1)
CH12pin 27Connected to: A connector 40%
  • Capacitor to GND on 60% · 1 nF (1), 1 µF (1), 100 nF (1)
  • Series resistor on 60% · 1 kΩ (2), 3.74 kΩ (1)
CH13pin 28Connected to: A connector 40% · GND 20%
  • Capacitor to GND on 40% · 1 µF (1), 100 nF (1)
  • Series resistor on 40% · 1 kΩ (2)
CH14pin 29Connected to: A connector 40%
  • Capacitor to GND on 60% · 1 nF (1), 1 µF (1), 100 nF (1)
  • Series resistor on 60% · 1 kΩ (2), 3.74 kΩ (1)
CH15pin 30Connected to: Signal 60% · not connected 20% · GND 20%
  • Capacitor to GND on 40% · 1 µF (1), 10 nF (1)
CH16pin 31Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 60% · 1 nF (1), 1 µF (1), 100 nF (1)
  • Series resistor on 60% · 1 kΩ (2), 3.74 kΩ (1)
CH17pin 32Connected to: Signal 60% · not connected 20% · GND 20%
  • Capacitor to GND on 40% · 1 µF (1), 100 nF (1)
  • Series resistor on 40% · 1 kΩ (2)
CH18pin 33Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 60% · 1 nF (1), 1 µF (1), 10 nF (1)
  • Series resistor on 40% · 3.74 kΩ (1), 1 kΩ (1)
CH19pin 34Connected to: Signal 60% · not connected 40%
  • Series resistor on 40% · 1 kΩ (2)
CH20pin 35Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 1 kΩ (2)
COMpin 36Connected to: GND 100%
RESETpin 42Connected to: The microcontroller 40% · not connected 20% · 5V 20%
  • Pull-up to 3.3V on 40% · 10 kΩ (1), 4.7 kΩ (1)
LDOpin 43Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 µF (5)
Q3pin 46Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 µF (5)
Q2pin 47Connected to: Signal 100%
  • Series capacitor on 100% · 10 µF (5)
Q1pin 48Connected to: Signal 100%
  • Series capacitor on 100% · 10 µF (5)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Temperature by cuspaceflight, BPSTemperature by corbosiny, Flight computer by Purdue-Space-Program and FOXSI-4 Formatter/Plenum board by foxsi.

The LTC2983 in open source designs

The gallery holds 5 open source boards using the LTC2983 from 5 GitHub repositories; a typical one measures about 82 × 65 mm and carries around 102 components.

60% use four copper layers or more, and 20% carry an open source license.

The most starred is Temperature by cuspaceflight.

Microcontrollers on boards using the LTC2983

What boards using the LTC2983 are built for

LTC2983: common questions

Where can I find a LTC2983 reference design?

Each of the 5 boards on this page is a real design using the LTC2983. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LTC2983 VREF_BYP pin connected?

The VREF_BYP pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the LTC2983.

How is the LTC2983 LDO pin connected?

The LDO pin has a capacitor to GND on 5 of 5 designs, most often 10 µF. Counted from the KiCad layouts of 5 open source designs using the LTC2983.

How is the LTC2983 Q3 pin connected?

The Q3 pin has a capacitor to GND on 5 of 5 designs, most often 10 µF. Counted from the KiCad layouts of 5 open source designs using the LTC2983.

Which microcontrollers do boards using the LTC2983 use?

Most are built on AVR/Arduino (1) and PIC (1).

How big is a typical board using the LTC2983?

The median is 82 × 65 mm, and 40% are two-layer designs.

What is the most popular open source board using the LTC2983?

By GitHub stars, Temperature by cuspaceflight, with 93 stars.

Can I simulate one of these boards using the LTC2983 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part