2 open source boards using the LTC7001IMSE#PBF
Real designs built with the LTC7001IMSE#PBF, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Power board
open-dynamic-robot-initiative
65 × 35 mm55 parts2LBSD-2-Clause13RP2040/RP2350
Billee hardware-2027
BILLEE-BroncoSTAR
240 × 90.5 mm265 parts4LMIT1
The LTC7001IMSE#PBF in open source designs
The gallery holds 2 open source boards using the LTC7001IMSE#PBF from 2 GitHub repositories; a typical one measures about 152.5 × 62.8 mm and carries around 160 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Power board by open-dynamic-robot-initiative.
Microcontrollers on boards using the LTC7001IMSE#PBF
What boards using the LTC7001IMSE#PBF are built for
LTC7001IMSE#PBF: common questions
Where can I find a LTC7001IMSE#PBF reference design?
Each of the 2 boards on this page is a real design using the LTC7001IMSE#PBF. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LTC7001IMSE#PBF use?
Most are built on RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the LTC7001IMSE#PBF?
The median is 152.5 × 62.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the LTC7001IMSE#PBF?
By GitHub stars, Power board by open-dynamic-robot-initiative, with 13 stars.
Can I simulate one of these boards using the LTC7001IMSE#PBF before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.