3 open source boards using the LVTH245

Real designs built with the LVTH245, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The LVTH245 in open source designs

The gallery holds 3 open source boards using the LVTH245 from 2 GitHub repositories; a typical one measures about 52.5 × 53.3 mm and carries around 63 components.

100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is BlueSCSI V2, Centronics 50 Pin, 2024.03a by BlueSCSI.

Parts used alongside the LVTH245

LVTH245: common questions

Where can I find a LVTH245 reference design?

Each of the 3 boards on this page is a real design using the LVTH245. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LVTH245?

The 74HC14, AMS1117-2.85 and LVT125 appear in the most repositories here.

How big is a typical board using the LVTH245?

The median is 52.5 × 53.3 mm, and 100% are two-layer designs.

What is the most popular open source board using the LVTH245?

By GitHub stars, BlueSCSI V2, Centronics 50 Pin, 2024.03a by BlueSCSI, with 457 stars.

Can I simulate one of these boards using the LVTH245 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part