2 open source boards using the M24C32

Real designs built with the M24C32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The M24C32 in open source designs

The gallery holds 2 open source boards using the M24C32 from 2 GitHub repositories; a typical one measures about 84 × 34.7 mm and carries around 86 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is MiniFeedPCB by SG-O.

Parts used alongside the M24C32

Microcontrollers on boards using the M24C32

What boards using the M24C32 are built for

M24C32: common questions

Where can I find a M24C32 reference design?

Each of the 2 boards on this page is a real design using the M24C32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the M24C32 use?

Most are built on STM32 (2).

How big is a typical board using the M24C32?

The median is 84 × 34.7 mm, and 100% are two-layer designs.

What is the most popular open source board using the M24C32?

By GitHub stars, MiniFeedPCB by SG-O, with 10 stars.

Can I simulate one of these boards using the M24C32 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part