2 open source boards using the M25P16-VMN6P
Real designs built with the M25P16-VMN6P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Sparky2
ArduPilot
34.9 × 35.3 mm69 parts4LNo license244
STM32Sparky2
HertZhang
34.9 × 35.3 mm69 parts4LNo license0
The M25P16-VMN6P in open source designs
The gallery holds 2 open source boards using the M25P16-VMN6P from 2 GitHub repositories; a typical one measures about 34.9 × 35.3 mm and carries around 69 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Sparky2 by ArduPilot.
Parts used alongside the M25P16-VMN6P
Microcontrollers on boards using the M25P16-VMN6P
M25P16-VMN6P: common questions
Where can I find a M25P16-VMN6P reference design?
Each of the 2 boards on this page is a real design using the M25P16-VMN6P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the M25P16-VMN6P?
The 497-11767, CC_U6, LP2992IM5-3.3, MAX3051EKA+T and MPU-9250 appear in the most repositories here.
Which microcontrollers do boards using the M25P16-VMN6P use?
Most are built on STM32 (2).
How big is a typical board using the M25P16-VMN6P?
The median is 34.9 × 35.3 mm, and 0% are two-layer designs.
What is the most popular open source board using the M25P16-VMN6P?
By GitHub stars, Sparky2 by ArduPilot, with 244 stars.
Can I simulate one of these boards using the M25P16-VMN6P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.