3 open source boards using the MB85RS256B
Real designs built with the MB85RS256B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
DBGC
deltabeard
51.4 × 60.6 mm65 parts4LNo license57AVR/Arduino
Fram prototype
uw-madison-chem-shops
91.4 × 66 mm25 parts2LCERN-OHL-P-2.01STM32
Sss opr3-v1 (1)
Space-and-Satellite-Systems-UC-Davis
90 × 90 mm267 parts4LNo license0
The MB85RS256B in open source designs
The gallery holds 3 open source boards using the MB85RS256B from 3 GitHub repositories; a typical one measures about 90 × 66 mm and carries around 65 components.
67% use four copper layers or more, and 33% carry an open source license.
The most starred is DBGC by deltabeard.
Microcontrollers on boards using the MB85RS256B
What boards using the MB85RS256B are built for
MB85RS256B: common questions
Where can I find a MB85RS256B reference design?
Each of the 3 boards on this page is a real design using the MB85RS256B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MB85RS256B use?
Most are built on AVR/Arduino (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the MB85RS256B?
The median is 90 × 66 mm, and 33% are two-layer designs.
What is the most popular open source board using the MB85RS256B?
By GitHub stars, DBGC by deltabeard, with 57 stars.
Can I simulate one of these boards using the MB85RS256B before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.