3 open source boards using the MC68901P

Real designs built with the MC68901P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The MC68901P in open source designs

The gallery holds 3 open source boards using the MC68901P from 2 GitHub repositories; a typical one measures about 254 × 243.8 mm and carries around 74 components.

100% use four copper layers or more, and 33% carry an open source license.

The most starred is Rosco m68k by rosco-m68k.

Microcontrollers on boards using the MC68901P

What boards using the MC68901P are built for

MC68901P: common questions

Where can I find a MC68901P reference design?

Each of the 3 boards on this page is a real design using the MC68901P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MC68901P use?

Most are built on AVR/Arduino (1).

How big is a typical board using the MC68901P?

The median is 254 × 243.8 mm, and 0% are two-layer designs.

What is the most popular open source board using the MC68901P?

By GitHub stars, Rosco m68k by rosco-m68k, with 199 stars.

Can I simulate one of these boards using the MC68901P before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part