5 open source boards using the MC7805BDTRKG
Real designs built with the MC7805BDTRKG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Documentation
Biomicrosystems
105 × 72 mm28 parts2LNo license2AVR/Arduino
SmoothBus-T2A
theHeathLee
31 × 31.8 mm14 parts2LNo license2FlailDriver
hhaudio
19.1 × 212.7 mm85 parts2LNo license0Heater Control Circuit
KitiliKisinguh
44 × 37 mm16 parts2LMIT1MFSerial Proto
zibredlektab
69.9 × 47.8 mm24 parts2LGPL-3.00
How designs wire the MC7805BDTRKG
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MC7805BDTRKG connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin is tied to VCC on 5 of 5 designs.
- The OUT pin is tied to 5V on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: VCC 100% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| OUTpin 3 | Connected to: 5V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Documentation by Biomicrosystems, SmoothBus-T2A by theHeathLee, Heater Control Circuit by KitiliKisinguh and FlailDriver by hhaudio.
The MC7805BDTRKG in open source designs
The gallery holds 5 open source boards using the MC7805BDTRKG from 5 GitHub repositories; a typical one measures about 44 × 47.8 mm and carries around 24 components.
100% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Documentation by Biomicrosystems.
Microcontrollers on boards using the MC7805BDTRKG
MC7805BDTRKG: common questions
Where can I find a MC7805BDTRKG reference design?
Each of the 5 boards on this page is a real design using the MC7805BDTRKG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MC7805BDTRKG IN pin connected?
The IN pin is tied to VCC on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MC7805BDTRKG.
How is the MC7805BDTRKG OUT pin connected?
The OUT pin is tied to 5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MC7805BDTRKG.
Which microcontrollers do boards using the MC7805BDTRKG use?
Most are built on AVR/Arduino (1) and ESP8266 (1).
How big is a typical board using the MC7805BDTRKG?
The median is 44 × 47.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the MC7805BDTRKG?
By GitHub stars, Documentation by Biomicrosystems, with 2 stars.
Can I simulate one of these boards using the MC7805BDTRKG before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.