2 open source boards using the MCP1703A-3302E/DB
Real designs built with the MCP1703A-3302E/DB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Onyks atxmega256-devboard
knonyks
55 × 102 mm43 parts4LMIT2AVR/Arduino
ECU STM V1
mstevanin4
93 × 108 mm201 parts4LNo license1
The MCP1703A-3302E/DB in open source designs
The gallery holds 2 open source boards using the MCP1703A-3302E/DB from 2 GitHub repositories; a typical one measures about 74 × 105 mm and carries around 122 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Onyks atxmega256-devboard by knonyks.
Microcontrollers on boards using the MCP1703A-3302E/DB
What boards using the MCP1703A-3302E/DB are built for
MCP1703A-3302E/DB: common questions
Where can I find a MCP1703A-3302E/DB reference design?
Each of the 2 boards on this page is a real design using the MCP1703A-3302E/DB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP1703A-3302E/DB use?
Most are built on AVR/Arduino (2).
How big is a typical board using the MCP1703A-3302E/DB?
The median is 74 × 105 mm, and 0% are two-layer designs.
What is the most popular open source board using the MCP1703A-3302E/DB?
By GitHub stars, Onyks atxmega256-devboard by knonyks, with 2 stars.
Can I simulate one of these boards using the MCP1703A-3302E/DB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.