2 open source boards using the MCP6022-I/ST
Real designs built with the MCP6022-I/ST, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32ANC Helmet - main board (left earcup)
baba2712
60 × 50 mm139 parts4LMIT0
ANC Helmet - satellite board (right earcup)
34 × 26 mm42 parts2LMIT0
The MCP6022-I/ST in open source designs
The gallery holds 2 open source boards using the MCP6022-I/ST from 1 GitHub repository; a typical one measures about 47 × 38 mm and carries around 91 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is ANC Helmet - main board (left earcup) by baba2712.
Microcontrollers on boards using the MCP6022-I/ST
What boards using the MCP6022-I/ST are built for
MCP6022-I/ST: common questions
Where can I find a MCP6022-I/ST reference design?
Each of the 2 boards on this page is a real design using the MCP6022-I/ST. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP6022-I/ST use?
Most are built on STM32 (1).
How big is a typical board using the MCP6022-I/ST?
The median is 47 × 38 mm, and 50% are two-layer designs.
What is the most popular open source board using the MCP6022-I/ST?
By GitHub stars, ANC Helmet - main board (left earcup) by baba2712, with 0 stars.
Can I simulate one of these boards using the MCP6022-I/ST before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.