2 open source boards using the MCP7940NT-I/SN
Real designs built with the MCP7940NT-I/SN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Ulx3s
emard
94 × 50.8 mm212 parts4LMIT470${project name} ${project version}
intergalaktik
30 × 55 mm23 parts4LCustom license20
The MCP7940NT-I/SN in open source designs
The gallery holds 2 open source boards using the MCP7940NT-I/SN from 2 GitHub repositories; a typical one measures about 62 × 52.9 mm and carries around 118 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Ulx3s by emard.
Microcontrollers on boards using the MCP7940NT-I/SN
What boards using the MCP7940NT-I/SN are built for
MCP7940NT-I/SN: common questions
Where can I find a MCP7940NT-I/SN reference design?
Each of the 2 boards on this page is a real design using the MCP7940NT-I/SN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP7940NT-I/SN use?
Most are built on ESP32 (1).
How big is a typical board using the MCP7940NT-I/SN?
The median is 62 × 52.9 mm, and 0% are two-layer designs.
What is the most popular open source board using the MCP7940NT-I/SN?
By GitHub stars, Ulx3s by emard, with 470 stars.
Can I simulate one of these boards using the MCP7940NT-I/SN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.