2 open source boards using the MCP9804T-E/MC

Real designs built with the MCP9804T-E/MC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The MCP9804T-E/MC in open source designs

The gallery holds 2 open source boards using the MCP9804T-E/MC from 2 GitHub repositories; a typical one measures about 65 × 56 mm and carries around 93 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is RPi-HwAB by prestofuoco.

Microcontrollers on boards using the MCP9804T-E/MC

FPGA 1

What boards using the MCP9804T-E/MC are built for

Dev boards & breakouts 2

MCP9804T-E/MC: common questions

Where can I find a MCP9804T-E/MC reference design?

Each of the 2 boards on this page is a real design using the MCP9804T-E/MC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MCP9804T-E/MC use?

Most are built on FPGA (1).

How big is a typical board using the MCP9804T-E/MC?

The median is 65 × 56 mm, and 0% are two-layer designs.

What is the most popular open source board using the MCP9804T-E/MC?

By GitHub stars, RPi-HwAB by prestofuoco, with 1 stars.

Can I simulate one of these boards using the MCP9804T-E/MC before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.