2 open source boards using the MIC28516T-E/PHA

Real designs built with the MIC28516T-E/PHA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The MIC28516T-E/PHA in open source designs

The gallery holds 2 open source boards using the MIC28516T-E/PHA from 1 GitHub repository; a typical one measures about 105 × 105 mm and carries around 310 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Dev real production by iamdarshg.

Microcontrollers on boards using the MIC28516T-E/PHA

RP2040/RP2350 2

What boards using the MIC28516T-E/PHA are built for

Dev boards & breakouts 2

MIC28516T-E/PHA: common questions

Where can I find a MIC28516T-E/PHA reference design?

Each of the 2 boards on this page is a real design using the MIC28516T-E/PHA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MIC28516T-E/PHA use?

Most are built on RP2040/RP2350 (2).

How big is a typical board using the MIC28516T-E/PHA?

The median is 105 × 105 mm, and 0% are two-layer designs.

What is the most popular open source board using the MIC28516T-E/PHA?

By GitHub stars, Dev real production by iamdarshg, with 1 stars.

Can I simulate one of these boards using the MIC28516T-E/PHA before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.