4 open source boards using the MIC5317-3.3YD5
Real designs built with the MIC5317-3.3YD5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Starfish
theacodes
100 × 100 mm220 parts4LMIT1.1k
WP-2 IC-Card MRAM
bkw777
54 × 54 mm27 parts2LCustom license13
RP2040/RP2350Simple
100 × 100 mm219 parts4LMIT1.1k
WP-2 IC-Card MRAM 512K shielded
54 × 54 mm27 parts2LCustom license13
The MIC5317-3.3YD5 in open source designs
The gallery holds 4 open source boards using the MIC5317-3.3YD5 from 2 GitHub repositories; a typical one measures about 77 × 77 mm and carries around 123 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Starfish by theacodes.
Microcontrollers on boards using the MIC5317-3.3YD5
What boards using the MIC5317-3.3YD5 are built for
MIC5317-3.3YD5: common questions
Where can I find a MIC5317-3.3YD5 reference design?
Each of the 4 boards on this page is a real design using the MIC5317-3.3YD5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC5317-3.3YD5 use?
Most are built on RP2040/RP2350 (2).
How big is a typical board using the MIC5317-3.3YD5?
The median is 77 × 77 mm, and 50% are two-layer designs.
What is the most popular open source board using the MIC5317-3.3YD5?
By GitHub stars, Starfish by theacodes, with 1,143 stars.
Can I simulate one of these boards using the MIC5317-3.3YD5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.