4 open source boards using the MIC550X
Real designs built with the MIC550X, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Digitalnametag
robperkel
61 × 31 mm41 parts4LNo license1AVR/Arduino
Spectre
ahtn
223 × 72.2 mm60 parts2LNo license96Nordic nRF
NRF52811 USB
alvarop
41.8 × 14.8 mm42 parts4LMIT21Nordic nRF
NRF52811 USB LoRa
alvarop
31 × 19 mm34 parts2LMIT21
The MIC550X in open source designs
The gallery holds 4 open source boards using the MIC550X from 3 GitHub repositories; a typical one measures about 51.4 × 25 mm and carries around 42 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Spectre by ahtn.
Microcontrollers on boards using the MIC550X
What boards using the MIC550X are built for
MIC550X: common questions
Where can I find a MIC550X reference design?
Each of the 4 boards on this page is a real design using the MIC550X. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC550X use?
Most are built on Nordic nRF (2) and AVR/Arduino (1).
How big is a typical board using the MIC550X?
The median is 51.4 × 25 mm, and 50% are two-layer designs.
What is the most popular open source board using the MIC550X?
By GitHub stars, Spectre by ahtn, with 96 stars.
Can I simulate one of these boards using the MIC550X before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.