3 open source boards using the MIC5524-3.3YMT-T5
Real designs built with the MIC5524-3.3YMT-T5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Rosmo ESC
rosmo-robot
50 × 50 mm105 parts4LCERN-OHL-P-2.032STM32
ODrive
Sasasu
53 × 70 mm162 parts4LNo license0RP2040/RP2350
Roboesc micro
runger1101001
40 × 38.1 mm103 parts4LNo license0
The MIC5524-3.3YMT-T5 in open source designs
The gallery holds 3 open source boards using the MIC5524-3.3YMT-T5 from 3 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 105 components.
100% use four copper layers or more, and 33% carry an open source license.
The most starred is Rosmo ESC by rosmo-robot.
Microcontrollers on boards using the MIC5524-3.3YMT-T5
What boards using the MIC5524-3.3YMT-T5 are built for
MIC5524-3.3YMT-T5: common questions
Where can I find a MIC5524-3.3YMT-T5 reference design?
Each of the 3 boards on this page is a real design using the MIC5524-3.3YMT-T5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC5524-3.3YMT-T5 use?
Most are built on STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the MIC5524-3.3YMT-T5?
The median is 50 × 50 mm, and 0% are two-layer designs.
What is the most popular open source board using the MIC5524-3.3YMT-T5?
By GitHub stars, Rosmo ESC by rosmo-robot, with 32 stars.
Can I simulate one of these boards using the MIC5524-3.3YMT-T5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.