3 open source boards using the MMA8452QR1

Real designs built with the MMA8452QR1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The MMA8452QR1 in open source designs

The gallery holds 3 open source boards using the MMA8452QR1 from 2 GitHub repositories; a typical one measures about 81.1 × 53.2 mm and carries around 77 components.

67% use four copper layers or more, and 0% carry an open source license.

The most starred is Flashlight full v1-1 by ahmadtak-3212.

Microcontrollers on boards using the MMA8452QR1

What boards using the MMA8452QR1 are built for

MMA8452QR1: common questions

Where can I find a MMA8452QR1 reference design?

Each of the 3 boards on this page is a real design using the MMA8452QR1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MMA8452QR1 use?

Most are built on STM32 (2) and RP2040/RP2350 (1).

How big is a typical board using the MMA8452QR1?

The median is 81.1 × 53.2 mm, and 33% are two-layer designs.

What is the most popular open source board using the MMA8452QR1?

By GitHub stars, Flashlight full v1-1 by ahmadtak-3212, with 0 stars.

Can I simulate one of these boards using the MMA8452QR1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part