2 open source boards using the MOC3063S

Real designs built with the MOC3063S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The MOC3063S in open source designs

The gallery holds 2 open source boards using the MOC3063S from 2 GitHub repositories; a typical one measures about 130.2 × 74.9 mm and carries around 106 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is ESPrinkler-Retic-Controller by slippery-carrot.

Microcontrollers on boards using the MOC3063S

What boards using the MOC3063S are built for

MOC3063S: common questions

Where can I find a MOC3063S reference design?

Each of the 2 boards on this page is a real design using the MOC3063S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MOC3063S use?

Most are built on ESP32 (1).

How big is a typical board using the MOC3063S?

The median is 130.2 × 74.9 mm, and 100% are two-layer designs.

What is the most popular open source board using the MOC3063S?

By GitHub stars, ESPrinkler-Retic-Controller by slippery-carrot, with 6 stars.

Can I simulate one of these boards using the MOC3063S before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part