2 open source boards using the MP2459GJ-Z-MS
Real designs built with the MP2459GJ-Z-MS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Stepper driver
bluesatunsw
62 × 55.5 mm204 parts6LApache-2.05
Connector board
45 × 36 mm16 parts2LApache-2.05
The MP2459GJ-Z-MS in open source designs
The gallery holds 2 open source boards using the MP2459GJ-Z-MS from 1 GitHub repository; a typical one measures about 53.5 × 45.8 mm and carries around 110 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Stepper driver by bluesatunsw.
Microcontrollers on boards using the MP2459GJ-Z-MS
What boards using the MP2459GJ-Z-MS are built for
MP2459GJ-Z-MS: common questions
Where can I find a MP2459GJ-Z-MS reference design?
Each of the 2 boards on this page is a real design using the MP2459GJ-Z-MS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MP2459GJ-Z-MS use?
Most are built on STM32 (1).
How big is a typical board using the MP2459GJ-Z-MS?
The median is 53.5 × 45.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the MP2459GJ-Z-MS?
By GitHub stars, Stepper driver by bluesatunsw, with 5 stars.
Can I simulate one of these boards using the MP2459GJ-Z-MS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.