3 open source boards using the MR25H10
Real designs built with the MR25H10, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32EPS
rgw3d
85 × 85 mm629 parts4LGPL-3.0155
STM32Sun sensor test
132.7 × 37.3 mm151 parts2LGPL-3.0155
STM32AVIONICS BOARD
85 × 85 mm132 parts4LGPL-3.0155
The MR25H10 in open source designs
The gallery holds 3 open source boards using the MR25H10 from 1 GitHub repository; a typical one measures about 85 × 85 mm and carries around 151 components.
67% use four copper layers or more, and 100% carry an open source license.
The most starred is EPS by rgw3d.
Microcontrollers on boards using the MR25H10
What boards using the MR25H10 are built for
MR25H10: common questions
Where can I find a MR25H10 reference design?
Each of the 3 boards on this page is a real design using the MR25H10. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MR25H10 use?
Most are built on STM32 (3).
How big is a typical board using the MR25H10?
The median is 85 × 85 mm, and 33% are two-layer designs.
What is the most popular open source board using the MR25H10?
By GitHub stars, EPS by rgw3d, with 155 stars.
Can I simulate one of these boards using the MR25H10 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.