2 open source boards using the MT41K256M16HA-125_E

Real designs built with the MT41K256M16HA-125_E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The MT41K256M16HA-125_E in open source designs

The gallery holds 2 open source boards using the MT41K256M16HA-125_E from 2 GitHub repositories; a typical one measures about 102.2 × 56.8 mm and carries around 234 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is ZynqPCB by juliancoy.

Microcontrollers on boards using the MT41K256M16HA-125_E

What boards using the MT41K256M16HA-125_E are built for

MT41K256M16HA-125_E: common questions

Where can I find a MT41K256M16HA-125_E reference design?

Each of the 2 boards on this page is a real design using the MT41K256M16HA-125_E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MT41K256M16HA-125_E use?

Most are built on FPGA (1).

How big is a typical board using the MT41K256M16HA-125_E?

The median is 102.2 × 56.8 mm, and 0% are two-layer designs.

What is the most popular open source board using the MT41K256M16HA-125_E?

By GitHub stars, ZynqPCB by juliancoy, with 75 stars.

Can I simulate one of these boards using the MT41K256M16HA-125_E before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part