3 open source boards using the MT6835GT-STD

Real designs built with the MT6835GT-STD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The MT6835GT-STD in open source designs

The gallery holds 3 open source boards using the MT6835GT-STD from 3 GitHub repositories; a typical one measures about 35 × 35 mm and carries around 61 components.

100% use four copper layers or more, and 67% carry an open source license.

The most starred is CawDrive by noxrick91.

Microcontrollers on boards using the MT6835GT-STD

What boards using the MT6835GT-STD are built for

MT6835GT-STD: common questions

Where can I find a MT6835GT-STD reference design?

Each of the 3 boards on this page is a real design using the MT6835GT-STD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MT6835GT-STD use?

Most are built on RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the MT6835GT-STD?

The median is 35 × 35 mm, and 0% are two-layer designs.

What is the most popular open source board using the MT6835GT-STD?

By GitHub stars, CawDrive by noxrick91, with 107 stars.

Can I simulate one of these boards using the MT6835GT-STD before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part