2 open source boards using the NCP702SN33T1G

Real designs built with the NCP702SN33T1G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The NCP702SN33T1G in open source designs

The gallery holds 2 open source boards using the NCP702SN33T1G from 2 GitHub repositories; a typical one measures about 99 × 97 mm and carries around 471 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is LibreVNA by jankae.

Parts used alongside the NCP702SN33T1G

Microcontrollers on boards using the NCP702SN33T1G

NCP702SN33T1G: common questions

Where can I find a NCP702SN33T1G reference design?

Each of the 2 boards on this page is a real design using the NCP702SN33T1G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the NCP702SN33T1G use?

Most are built on STM32 (2).

How big is a typical board using the NCP702SN33T1G?

The median is 99 × 97 mm, and 0% are two-layer designs.

What is the most popular open source board using the NCP702SN33T1G?

By GitHub stars, LibreVNA by jankae, with 1,636 stars.

Can I simulate one of these boards using the NCP702SN33T1G before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part