4 open source boards using the OLED_I2C
Real designs built with the OLED_I2C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
NoPour
plertvilai
45.7 × 66 mm68 parts2LMIT7ESP32
PaLampa MoBo H00
Vedatori
60 × 100 mm75 parts2LNo license4ESP32
PaLampa MoBo H01
Vedatori
60 × 100 mm74 parts2LNo license4AVR/Arduino
Unrouted
plertvilai
44.5 × 57.8 mm63 parts2LMIT7
The OLED_I2C in open source designs
The gallery holds 4 open source boards using the OLED_I2C from 2 GitHub repositories; a typical one measures about 52.9 × 83 mm and carries around 71 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is NoPour by plertvilai.
Microcontrollers on boards using the OLED_I2C
What boards using the OLED_I2C are built for
OLED_I2C: common questions
Where can I find a OLED_I2C reference design?
Each of the 4 boards on this page is a real design using the OLED_I2C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the OLED_I2C use?
Most are built on AVR/Arduino (2) and ESP32 (2).
How big is a typical board using the OLED_I2C?
The median is 52.9 × 83 mm, and 100% are two-layer designs.
What is the most popular open source board using the OLED_I2C?
By GitHub stars, NoPour by plertvilai, with 7 stars.
Can I simulate one of these boards using the OLED_I2C before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.