7 open source boards using the OPA376AIDBVR

Real designs built with the OPA376AIDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the OPA376AIDBVR

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the OPA376AIDBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The V+_5 pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 4.7 µF).
  • The V-_2 pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 10 nF).
  • The +IN pin has a series resistor on 4 of 7 designs, most often 10 kΩ (then 9.09 kΩ).
  • The OUT pin has a series resistor on 3 of 7 designs, most often 1 kΩ (then 10 kΩ).
OUTpin 1Connected to: Signal 86%
  • Series resistor on 43% · 1 kΩ (2), 10 kΩ (1), 110 kΩ (1)
V-_2pin 2Connected to: 2.5V 43% · GND 29% · a signal 29%
  • Decoupling capacitor on 57% · 100 nF (8), 10 nF (1), 1 µF (1)
+INpin 3Connected to: A connector 29%
  • Series resistor on 57% · 10 kΩ (3), 9.09 kΩ (1), 4.7 kΩ (1)
-INpin 4Connected to: Signal 86%
  • Series resistor on 43% · 1 MΩ (3), 10 kΩ (2), 1 kΩ (1)
V+_5pin 5Connected to: 5V 71% · a signal 29%
  • Decoupling capacitor on 86% · 100 nF (8), 4.7 µF (1), 1 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EEZ DIB DCP405plus by eez-open, Dib mio168 by eez-open, Dib mio afe3 by eez-open and Black Body Temperature Sensor PCB by DylanLockyer.

The OPA376AIDBVR in open source designs

The gallery holds 7 open source boards using the OPA376AIDBVR from 7 GitHub repositories; a typical one measures about 110 × 94 mm and carries around 225 components.

100% use four copper layers or more, and 57% carry an open source license.

The most starred is EEZ DIB DCP405plus by eez-open.

Parts used alongside the OPA376AIDBVR

Microcontrollers on boards using the OPA376AIDBVR

What boards using the OPA376AIDBVR are built for

OPA376AIDBVR: common questions

Where can I find a OPA376AIDBVR reference design?

Each of the 7 boards on this page is a real design using the OPA376AIDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the OPA376AIDBVR V+_5 pin?

The V+_5 pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the OPA376AIDBVR.

What decoupling capacitors do designs use on the OPA376AIDBVR V-_2 pin?

The V-_2 pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 7 open source designs using the OPA376AIDBVR.

What resistor goes on the OPA376AIDBVR +IN pin?

The +IN pin has a series resistor on 4 of 7 designs, most often 10 kΩ (then 9.09 kΩ). Counted from the KiCad layouts of 7 open source designs using the OPA376AIDBVR.

Which microcontrollers do boards using the OPA376AIDBVR use?

Most are built on STM32 (3) and ESP32 (1).

How big is a typical board using the OPA376AIDBVR?

The median is 110 × 94 mm, and 0% are two-layer designs.

What is the most popular open source board using the OPA376AIDBVR?

By GitHub stars, EEZ DIB DCP405plus by eez-open, with 11 stars.

Can I simulate one of these boards using the OPA376AIDBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part