2 open source boards using the PC817X2NSZ9F
Real designs built with the PC817X2NSZ9F, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Atc roip gateway
ajisrawi
125 × 95 mm99 parts4LCustom license1ESP32
Shack Relay Matrix rev C: controller board
PE1RGU
152 × 122.5 mm79 parts4LCERN-OHL-S-2.02
The PC817X2NSZ9F in open source designs
The gallery holds 2 open source boards using the PC817X2NSZ9F from 2 GitHub repositories; a typical one measures about 138.5 × 108.8 mm and carries around 89 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Shack Relay Matrix rev C: controller board by PE1RGU.
What boards using the PC817X2NSZ9F are built for
PC817X2NSZ9F: common questions
Where can I find a PC817X2NSZ9F reference design?
Each of the 2 boards on this page is a real design using the PC817X2NSZ9F. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the PC817X2NSZ9F use?
Most are built on ESP32 (1) and STM32 (1).
How big is a typical board using the PC817X2NSZ9F?
The median is 138.5 × 108.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the PC817X2NSZ9F?
By GitHub stars, Shack Relay Matrix rev C: controller board by PE1RGU, with 2 stars.
Can I simulate one of these boards using the PC817X2NSZ9F before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.