2 open source boards using the PCF85363ATT

Real designs built with the PCF85363ATT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The PCF85363ATT in open source designs

The gallery holds 2 open source boards using the PCF85363ATT from 2 GitHub repositories; a typical one measures about 92.5 × 77 mm and carries around 301 components.

50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Vaio re by CRImier.

Parts used alongside the PCF85363ATT

Microcontrollers on boards using the PCF85363ATT

What boards using the PCF85363ATT are built for

PCF85363ATT: common questions

Where can I find a PCF85363ATT reference design?

Each of the 2 boards on this page is a real design using the PCF85363ATT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the PCF85363ATT use?

Most are built on RP2040/RP2350 (2).

How big is a typical board using the PCF85363ATT?

The median is 92.5 × 77 mm, and 50% are two-layer designs.

What is the most popular open source board using the PCF85363ATT?

By GitHub stars, Vaio re by CRImier, with 254 stars.

Can I simulate one of these boards using the PCF85363ATT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part