3 open source boards using the PCM1802DBR

Real designs built with the PCM1802DBR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The PCM1802DBR in open source designs

The gallery holds 3 open source boards using the PCM1802DBR from 2 GitHub repositories; a typical one measures about 150 × 90 mm and carries around 318 components.

67% use four copper layers or more, and 67% carry an open source license.

The most starred is Misrc v2.5-rounded by Stefan-Olt.

Microcontrollers on boards using the PCM1802DBR

What boards using the PCM1802DBR are built for

PCM1802DBR: common questions

Where can I find a PCM1802DBR reference design?

Each of the 3 boards on this page is a real design using the PCM1802DBR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the PCM1802DBR use?

Most are built on ESP32 (1).

How big is a typical board using the PCM1802DBR?

The median is 150 × 90 mm, and 33% are two-layer designs.

What is the most popular open source board using the PCM1802DBR?

By GitHub stars, Misrc v2.5-rounded by Stefan-Olt, with 231 stars.

Can I simulate one of these boards using the PCM1802DBR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part