2 open source boards using the PUSB3AB6Z

Real designs built with the PUSB3AB6Z, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The PUSB3AB6Z in open source designs

The gallery holds 2 open source boards using the PUSB3AB6Z from 2 GitHub repositories; a typical one measures about 119.8 × 82 mm and carries around 335 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is I.MX 6ULL Bare Bones by a1wolfe.

Microcontrollers on boards using the PUSB3AB6Z

What boards using the PUSB3AB6Z are built for

PUSB3AB6Z: common questions

Where can I find a PUSB3AB6Z reference design?

Each of the 2 boards on this page is a real design using the PUSB3AB6Z. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the PUSB3AB6Z use?

Most are built on STM32 (1).

How big is a typical board using the PUSB3AB6Z?

The median is 119.8 × 82 mm, and 0% are two-layer designs.

What is the most popular open source board using the PUSB3AB6Z?

By GitHub stars, I.MX 6ULL Bare Bones by a1wolfe, with 0 stars.

Can I simulate one of these boards using the PUSB3AB6Z before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part