2 open source boards using the PY32F003F18P6

Real designs built with the PY32F003F18P6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The PY32F003F18P6 in open source designs

The gallery holds 2 open source boards using the PY32F003F18P6 from 2 GitHub repositories; a typical one measures about 57.8 × 55 mm and carries around 164 components.

50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Pixelpine by machmar.

What boards using the PY32F003F18P6 are built for

PY32F003F18P6: common questions

Where can I find a PY32F003F18P6 reference design?

Each of the 2 boards on this page is a real design using the PY32F003F18P6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How big is a typical board using the PY32F003F18P6?

The median is 57.8 × 55 mm, and 50% are two-layer designs.

What is the most popular open source board using the PY32F003F18P6?

By GitHub stars, Pixelpine by machmar, with 0 stars.

Can I simulate one of these boards using the PY32F003F18P6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part