6 open source boards using the RAK4630

Real designs built with the RAK4630, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the RAK4630

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the RAK4630 connects to, and the resistors, capacitors and other passives placed on it.

  • The RF_BT pin is left unconnected on 4 of 5 designs.
  • The RF_LORA pin is left unconnected on 4 of 5 designs.
  • The P0.31/AIN7 pin is left unconnected on 4 of 5 designs.
  • The NRF_RESET pin has a capacitor to GND on 3 of 5 designs, most often 100 nF.
VBUSpin 1Connected to: VBUS 100%
P0.13/I2C_SDApin 4Connected to: A connector 80%
  • Pull-up to VDD_RAK1 on 40% · 4.7 kΩ (2)
P0.14/I2C_SCLpin 5Connected to: A connector 80%
  • Pull-up to VDD_RAK1 on 40% · 4.7 kΩ (2)
P0.10/NFC2pin 12Connected to: Not connected 60% · a signal 40%
P0.09/NFC1pin 13Connected to: Not connected 60% · a signal 40%
GND_1pin 14Connected to: GND 100%
RF_BTpin 15Connected to: Not connected 80% · a signal 20%
GND_2pin 16Connected to: GND 100%
NRF_RESETpin 17Connected to: A connector 60%
  • Capacitor to GND on 60% · 100 nF (2)
  • Pull-up to VDD_RAK1 on 40% · 10 kΩ (2)
VBAT_SXpin 20Connected to: VDD_RAK1 100%
  • Decoupling capacitor on 60% · 100 nF (5), 10 µF (1), 1 µF (1)
VBAT_IO_SXpin 21Connected to: VDD_RAK1 100%
  • Decoupling capacitor on 60% · 100 nF (5), 10 µF (1), 1 µF (1)
GND_3pin 22Connected to: GND 100%
P1.03/LED1pin 27Connected to: A connector 40%
  • Series resistor on 60% · 1 kΩ (2), 10 kΩ (1)
P0.03/QSPI_CLKpin 29Connected to: Not connected 60% · a signal 40%
P0.02/QSPI_DIO3pin 30Connected to: Not connected 60% · a signal 40%
P0.28/QSPI_DIO2pin 31Connected to: Not connected 60% · a signal 40%
P0.29/QSPI_DIO1pin 32Connected to: Not connected 60% · a signal 40%
P0.30/QSPI_DIO0pin 33Connected to: Not connected 60% · a signal 40%
P0.26/QSPI_CSpin 34Connected to: Not connected 60% · a signal 40%
GND_4pin 35Connected to: GND 80% · a signal 20%
GND_5pin 36Connected to: GND 100%
RF_LORApin 37Connected to: Not connected 80% · a signal 20%
GND_6pin 38Connected to: GND 100%
P0.31/AIN7pin 39Connected to: Not connected 80% · a signal 20%
P0.04/AIN2pin 41Connected to: Not connected 60% · VBAT_SENSE 20% · a signal 20%
GND_7pin 42Connected to: GND 100%
VDD_NRFpin 43Connected to: VDD_RAK1 80% · not connected 20%
  • Decoupling capacitor on 60% · 100 nF (4), 10 µF (2)
VBAT_NRFpin 44Connected to: VDD_RAK1 80% · a signal 20%
  • Decoupling capacitor on 60% · 100 nF (4), 10 µF (2)

16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Meshphone by DerRKDCB, Darknet smao by dcbokonon, Rak4630 interface by pashamray and BPV4 Collar by rees3901.

The RAK4630 in open source designs

The gallery holds 6 open source boards using the RAK4630 from 5 GitHub repositories; a typical one measures about 50.4 × 41.5 mm and carries around 44 components.

83% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Meshphone by DerRKDCB.

Parts used alongside the RAK4630

RAK4630: common questions

Where can I find a RAK4630 reference design?

Each of the 6 boards on this page is a real design using the RAK4630. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the RAK4630 RF_BT pin connected?

The RF_BT pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the RAK4630.

How is the RAK4630 RF_LORA pin connected?

The RF_LORA pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the RAK4630.

How is the RAK4630 P0.31/AIN7 pin connected?

The P0.31/AIN7 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the RAK4630.

How big is a typical board using the RAK4630?

The median is 50.4 × 41.5 mm, and 83% are two-layer designs.

What is the most popular open source board using the RAK4630?

By GitHub stars, Meshphone by DerRKDCB, with 5 stars.

Can I simulate one of these boards using the RAK4630 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part