6 open source boards using the Raspberry_Pi_2_3
Real designs built with the Raspberry_Pi_2_3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Ic880a backplane
dbrgn
93.9 × 83.8 mm34 parts2LTAPR-OHL-1.015Raspberry Pi
Voltastream0
JulianVolodia
65 × 30 mm116 parts4LCC-BY-NC-4.00RP2040/RP2350
Worx
adamant666
170 × 100 mm42 parts2LNo license0- schematic only · 34 partsESP32
Bugsy
SamuelNoesslboeck
34 partsCERN-OHL-P-2.00 Raspberry Pi
PI Cape
GT-IEEE-Robotics
85 × 56 mm12 parts2LNo license3Raspberry Pi
CPU
jonathan-tooley
265.4 × 95.3 mm32 parts2LNo license0
How designs wire the Raspberry_Pi_2_3
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the Raspberry_Pi_2_3 connects to, and the resistors, capacitors and other passives placed on it.
- The 5V pins is tied to 5V on 90% of them.
- The CE1/GPIO7 pin is left unconnected on 4 of 5 designs.
- The GPIO26 pin is left unconnected on 4 of 5 designs.
- The 3V3 pins is tied to 3.3V on 70% of them (not connected on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3V3pin 1, 17 | Connected to: 3.3V 70% · not connected 30% | — |
| 5Vpin 2, 4 | Connected to: 5V 90% | — |
| GNDpin 6, 9, 14, 20, 25, 30, 34, 39 | Connected to: GND 63% · not connected 38% | — |
| GPIO27pin 13 | Connected to: Not connected 60% · a signal 40% | — |
| MOSI0/GPIO10pin 19 | Connected to: Not connected 60% · a signal 40% | — |
| MISO0/GPIO9pin 21 | Connected to: Not connected 60% · a signal 40% | — |
| SCLK0/GPIO11pin 23 | Connected to: Not connected 60% · a signal 40% | — |
| CE0/GPIO8pin 24 | Connected to: Not connected 60% · a signal 40% | — |
| CE1/GPIO7pin 26 | Connected to: Not connected 80% · a signal 20% | — |
| PWM0/GPIO12pin 32 | Connected to: Not connected 60% · a signal 40% | — |
| PWM1/GPIO13pin 33 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO26pin 37 | Connected to: Not connected 80% · a signal 20% | — |
19 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ic880a backplane by dbrgn, PI Cape by GT-IEEE-Robotics, Worx by adamant666 and CPU by jonathan-tooley.
The Raspberry_Pi_2_3 in open source designs
The gallery holds 6 open source boards using the Raspberry_Pi_2_3 from 6 GitHub repositories; a typical one measures about 93.9 × 83.8 mm and carries around 34 components.
80% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Ic880a backplane by dbrgn.
Microcontrollers on boards using the Raspberry_Pi_2_3
What boards using the Raspberry_Pi_2_3 are built for
Raspberry_Pi_2_3: common questions
Where can I find a Raspberry_Pi_2_3 reference design?
Each of the 6 boards on this page is a real design using the Raspberry_Pi_2_3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the Raspberry_Pi_2_3 5V pin connected?
The 5V pins is tied to 5V on 90% of them. Counted from the KiCad layouts of 5 open source designs using the Raspberry_Pi_2_3.
How is the Raspberry_Pi_2_3 CE1/GPIO7 pin connected?
The CE1/GPIO7 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the Raspberry_Pi_2_3.
How is the Raspberry_Pi_2_3 GPIO26 pin connected?
The GPIO26 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the Raspberry_Pi_2_3.
Which microcontrollers do boards using the Raspberry_Pi_2_3 use?
Most are built on Raspberry Pi (4), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the Raspberry_Pi_2_3?
The median is 93.9 × 83.8 mm, and 80% are two-layer designs.
What is the most popular open source board using the Raspberry_Pi_2_3?
By GitHub stars, Ic880a backplane by dbrgn, with 15 stars.
Can I simulate one of these boards using the Raspberry_Pi_2_3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.