3 open source boards using the Raspberry Pi Pico 2W

Real designs built with the Raspberry Pi Pico 2W, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The Raspberry Pi Pico 2W in open source designs

The gallery holds 3 open source boards using the Raspberry Pi Pico 2W from 3 GitHub repositories; a typical one measures about 300 × 120 mm and carries around 173 components.

67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is BitaxeBIRDS by bitaxeorg.

Microcontrollers on boards using the Raspberry Pi Pico 2W

What boards using the Raspberry Pi Pico 2W are built for

Raspberry Pi Pico 2W: common questions

Where can I find a Raspberry Pi Pico 2W reference design?

Each of the 3 boards on this page is a real design using the Raspberry Pi Pico 2W. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the Raspberry Pi Pico 2W use?

Most are built on RP2040/RP2350 (3).

How big is a typical board using the Raspberry Pi Pico 2W?

The median is 300 × 120 mm, and 67% are two-layer designs.

What is the most popular open source board using the Raspberry Pi Pico 2W?

By GitHub stars, BitaxeBIRDS by bitaxeorg, with 6 stars.

Can I simulate one of these boards using the Raspberry Pi Pico 2W before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part