2 open source boards using the RaspberryPi Pico 2W

Real designs built with the RaspberryPi Pico 2W, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The RaspberryPi Pico 2W in open source designs

The gallery holds 2 open source boards using the RaspberryPi Pico 2W from 2 GitHub repositories; a typical one measures about 145.1 × 100.4 mm and carries around 92 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Bmacro Base V2 by KipJM.

Microcontrollers on boards using the RaspberryPi Pico 2W

What boards using the RaspberryPi Pico 2W are built for

RaspberryPi Pico 2W: common questions

Where can I find a RaspberryPi Pico 2W reference design?

Each of the 2 boards on this page is a real design using the RaspberryPi Pico 2W. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the RaspberryPi Pico 2W use?

Most are built on Raspberry Pi (1) and RP2040/RP2350 (1).

How big is a typical board using the RaspberryPi Pico 2W?

The median is 145.1 × 100.4 mm, and 100% are two-layer designs.

What is the most popular open source board using the RaspberryPi Pico 2W?

By GitHub stars, Bmacro Base V2 by KipJM, with 27 stars.

Can I simulate one of these boards using the RaspberryPi Pico 2W before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part