6 open source boards using the REG1117

Real designs built with the REG1117, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the REG1117

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the REG1117 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 is tied to GND on 5 of 5 designs.
  • Pin 2 is tied to 3.3V on 5 of 5 designs.
  • Pin 4 is left unconnected on 5 of 5 designs.
  • Pin 3 is tied to 5V on 4 of 5 designs.
Pin 1Connected to: GND 100%
Pin 2Connected to: 3.3V 100%
Pin 3Connected to: 5V 80% · a signal 20%
Pin 4Connected to: Not connected 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Fjöl by hallmar, Reflow controller by atx, USSTCM by UofSSpaceTeam and 123ADC eurorack by nebularnoise.

The REG1117 in open source designs

The gallery holds 6 open source boards using the REG1117 from 5 GitHub repositories; a typical one measures about 84.4 × 102.6 mm and carries around 64 components.

75% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.

The most starred is Fjöl by hallmar.

Parts used alongside the REG1117

Microcontrollers on boards using the REG1117

What boards using the REG1117 are built for

REG1117: common questions

Where can I find a REG1117 reference design?

Each of the 6 boards on this page is a real design using the REG1117. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the REG1117 pin 1 connected?

Pin 1 is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the REG1117.

How is the REG1117 pin 2 connected?

Pin 2 is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the REG1117.

How is the REG1117 pin 4 connected?

Pin 4 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the REG1117.

Which microcontrollers do boards using the REG1117 use?

Most are built on NXP (2) and STM32 (1).

How big is a typical board using the REG1117?

The median is 84.4 × 102.6 mm, and 75% are two-layer designs.

What is the most popular open source board using the REG1117?

By GitHub stars, Fjöl by hallmar, with 21 stars.

Can I simulate one of these boards using the REG1117 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part