2 open source boards using the RP2040 1

Real designs built with the RP2040 1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The RP2040 1 in open source designs

The gallery holds 2 open source boards using the RP2040 1 from 2 GitHub repositories; a typical one measures about 132 × 85.8 mm and carries around 286 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is PortaRe0 by 0Re0-8192.

Parts used alongside the RP2040 1

RP2040 2 2

Microcontrollers on boards using the RP2040 1

RP2040/RP2350 2

What boards using the RP2040 1 are built for

RP2040 1: common questions

Where can I find a RP2040 1 reference design?

Each of the 2 boards on this page is a real design using the RP2040 1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the RP2040 1 use?

Most are built on RP2040/RP2350 (2).

How big is a typical board using the RP2040 1?

The median is 132 × 85.8 mm, and 0% are two-layer designs.

What is the most popular open source board using the RP2040 1?

By GitHub stars, PortaRe0 by 0Re0-8192, with 2 stars.

Can I simulate one of these boards using the RP2040 1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.