6 open source boards using the RPi_Pico

Real designs built with the RPi_Pico, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the RPi_Pico

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the RPi_Pico connects to, and the resistors, capacitors and other passives placed on it.

  • The ADC_VREF pin is left unconnected on 5 of 6 designs.
  • The 3V3 pin is tied to 3.3V on 5 of 6 designs.
  • The 3V3_EN pin is left unconnected on 5 of 6 designs.
  • The RUN pin is left unconnected on 4 of 6 designs (a signal on 2).
GNDpin 3, 8, 13, 18, 23, 28, 33, 38, TP1Connected to: GND 100%
GP2pin 4Connected to: Signal 67% · not connected 33%
  • Series resistor on 33% · 100 Ω (1), 0 Ω (1)
GP3pin 5Connected to: Signal 67% · not connected 33%
  • Series resistor on 33% · 100 Ω (1), 0 Ω (1)
GP4pin 6Connected to: Signal 67% · not connected 33%
  • Series resistor on 33% · 100 kΩ (1), 0 Ω (1)
GP20pin 26Connected to: A connector 33% · not connected 33%
  • Pull-up to 3.3V on 33% · 2.2 kΩ (1), 2.4 kΩ (1)
GP21pin 27Connected to: Signal 67% · not connected 33%
  • Pull-up to 3.3V on 33% · 2.2 kΩ (1), 2.4 kΩ (1)
  • Series resistor on 33% · 0 Ω (1)
GP22pin 29Connected to: Not connected 50% · a signal 50%
  • Series resistor on 33% · 33 Ω (1), 0 Ω (1)
RUNpin 30Connected to: Not connected 67% · a signal 33%
GP28pin 34Connected to: Signal 67% · not connected 33%
  • Series resistor on 33% · 22 Ω (1), 33 Ω (1)
ADC_VREFpin 35Connected to: Not connected 83% · a signal 17%
3V3pin 36Connected to: 3.3V 83% · a signal 17%
3V3_ENpin 37Connected to: Not connected 83% · a signal 17%
VBUSpin 40Connected to: Not connected 67% · VBUS 33%

24 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Keyboard by dragonlock2, Digital board v1 by es-ude, DIYAH Main r0p0 by matt-txrx and T-Modem c1224 by PacketRadio80.

The RPi_Pico in open source designs

The gallery holds 6 open source boards using the RPi_Pico from 6 GitHub repositories; a typical one measures about 147.2 × 119.6 mm and carries around 79 components.

83% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is Keyboard by dragonlock2.

Microcontrollers on boards using the RPi_Pico

What boards using the RPi_Pico are built for

RPi_Pico: common questions

Where can I find a RPi_Pico reference design?

Each of the 6 boards on this page is a real design using the RPi_Pico. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the RPi_Pico ADC_VREF pin connected?

The ADC_VREF pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the RPi_Pico.

How is the RPi_Pico 3V3 pin connected?

The 3V3 pin is tied to 3.3V on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the RPi_Pico.

How is the RPi_Pico 3V3_EN pin connected?

The 3V3_EN pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the RPi_Pico.

Which microcontrollers do boards using the RPi_Pico use?

Most are built on RP2040/RP2350 (3) and AVR/Arduino (1).

How big is a typical board using the RPi_Pico?

The median is 147.2 × 119.6 mm, and 83% are two-layer designs.

What is the most popular open source board using the RPi_Pico?

By GitHub stars, Keyboard by dragonlock2, with 13 stars.

Can I simulate one of these boards using the RPi_Pico before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part