2 open source boards using the RTL8367S

Real designs built with the RTL8367S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The RTL8367S in open source designs

The gallery holds 2 open source boards using the RTL8367S from 2 GitHub repositories; a typical one measures about 84.5 × 86.7 mm and carries around 113 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is Switch board by FOSDEM.

Parts used alongside the RTL8367S

Microcontrollers on boards using the RTL8367S

What boards using the RTL8367S are built for

RTL8367S: common questions

Where can I find a RTL8367S reference design?

Each of the 2 boards on this page is a real design using the RTL8367S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the RTL8367S use?

Most are built on Raspberry Pi (1).

How big is a typical board using the RTL8367S?

The median is 84.5 × 86.7 mm, and 0% are two-layer designs.

What is the most popular open source board using the RTL8367S?

By GitHub stars, Switch board by FOSDEM, with 114 stars.

Can I simulate one of these boards using the RTL8367S before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part