5 open source boards using the S25FL256S
Real designs built with the S25FL256S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
DC801 Badge - BM
DC801
92.5 × 150.6 mm126 parts2LAGPL-3.063STM32
Musicboard
julbouln
67.1 × 56.9 mm74 parts2LNo license31RP2040/RP2350
Digital board v1
es-ude
90 × 65 mm240 parts8LMIT4RP2040/RP2350
Env
es-ude
57.8 × 34 mm181 parts4LMIT4FPGA
FPGABoard Spartan7 v1
es-ude
55.9 × 45 mm40 parts2LMIT4
The S25FL256S in open source designs
The gallery holds 5 open source boards using the S25FL256S from 3 GitHub repositories; a typical one measures about 67.1 × 56.9 mm and carries around 126 components.
60% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is DC801 Badge - BM by DC801.
Microcontrollers on boards using the S25FL256S
What boards using the S25FL256S are built for
S25FL256S: common questions
Where can I find a S25FL256S reference design?
Each of the 5 boards on this page is a real design using the S25FL256S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the S25FL256S use?
Most are built on RP2040/RP2350 (2), FPGA (1), Nordic nRF (1) and STM32 (1).
How big is a typical board using the S25FL256S?
The median is 67.1 × 56.9 mm, and 60% are two-layer designs.
What is the most popular open source board using the S25FL256S?
By GitHub stars, DC801 Badge - BM by DC801, with 63 stars.
Can I simulate one of these boards using the S25FL256S before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.