3 open source boards using the SA818S-V
Real designs built with the SA818S-V, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
PtFlex
custom-ds
50.1 × 88.2 mm76 parts2LGPL-3.03ESP32
Kicad foxhunt batterytest
gx1400
191.5 × 121.8 mm253 parts4LNo license0AVR/Arduino
PtSolar
custom-ds
38.5 × 73.5 mm70 parts4LGPL-3.00
The SA818S-V in open source designs
The gallery holds 3 open source boards using the SA818S-V from 3 GitHub repositories; a typical one measures about 50.1 × 88.2 mm and carries around 76 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is PtFlex by custom-ds.
Parts used alongside the SA818S-V
Microcontrollers on boards using the SA818S-V
What boards using the SA818S-V are built for
SA818S-V: common questions
Where can I find a SA818S-V reference design?
Each of the 3 boards on this page is a real design using the SA818S-V. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SA818S-V?
The ATGM336H-5N31, ATMEGA328P-AU and LP3985IM5-3.3/NOPB appear in the most repositories here.
Which microcontrollers do boards using the SA818S-V use?
Most are built on AVR/Arduino (2) and ESP32 (1).
How big is a typical board using the SA818S-V?
The median is 50.1 × 88.2 mm, and 33% are two-layer designs.
What is the most popular open source board using the SA818S-V?
By GitHub stars, PtFlex by custom-ds, with 3 stars.
Can I simulate one of these boards using the SA818S-V before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.