2 open source boards using the SHT3x-DIS

Real designs built with the SHT3x-DIS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The SHT3x-DIS in open source designs

The gallery holds 2 open source boards using the SHT3x-DIS from 2 GitHub repositories; a typical one measures about 37 × 59 mm and carries around 63 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Chaac by alvarop.

Microcontrollers on boards using the SHT3x-DIS

What boards using the SHT3x-DIS are built for

SHT3x-DIS: common questions

Where can I find a SHT3x-DIS reference design?

Each of the 2 boards on this page is a real design using the SHT3x-DIS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SHT3x-DIS use?

Most are built on STM32 (2).

How big is a typical board using the SHT3x-DIS?

The median is 37 × 59 mm, and 0% are two-layer designs.

What is the most popular open source board using the SHT3x-DIS?

By GitHub stars, Chaac by alvarop, with 21 stars.

Can I simulate one of these boards using the SHT3x-DIS before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part