4 open source boards using the Si7060-01
Real designs built with the Si7060-01, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32-li ion cell monitor pan
pcbreflux
94 × 26 mm47 parts2LGPL-3.0608ESP32
ESP32-li ion cell monitor pan
fabriziotappero
94 × 26 mm47 parts2LGPL-3.00ESP32
ESP32-li ion cell monitor
pcbreflux
90 × 26 mm45 parts2LGPL-3.0608ESP32
ESP32-li ion cell monitor
fabriziotappero
90 × 26 mm45 parts2LGPL-3.00
The Si7060-01 in open source designs
The gallery holds 4 open source boards using the Si7060-01 from 2 GitHub repositories; a typical one measures about 92 × 26 mm and carries around 46 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is ESP32-li ion cell monitor pan by pcbreflux.
Parts used alongside the Si7060-01
Microcontrollers on boards using the Si7060-01
Si7060-01: common questions
Where can I find a Si7060-01 reference design?
Each of the 4 boards on this page is a real design using the Si7060-01. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the Si7060-01?
The ESP-WROOM-32, INA226_SOT25-5, SI7060-00 and XC6220B281MR-G appear in the most repositories here.
Which microcontrollers do boards using the Si7060-01 use?
Most are built on ESP32 (4).
How big is a typical board using the Si7060-01?
The median is 92 × 26 mm, and 100% are two-layer designs.
What is the most popular open source board using the Si7060-01?
By GitHub stars, ESP32-li ion cell monitor pan by pcbreflux, with 608 stars.
Can I simulate one of these boards using the Si7060-01 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.